Boards used for cutting materials include MDF and particleboard. The hardness of these two kinds of boards is relatively high, but they are widely used in the production of panel furniture due to their low cost and easy processing. However, the two boards have a common disadvantage, that is, the two boards are pressed together, that is, they are not one piece. If the bond strength is not strong, it can easily collapse when cutting the material.
solution:
The choice of board may make it impossible for us to change, but we can choose a good CNC woodworking cutting machine, edge chipping mainly occurs on table saws and poor quality cutting machines, and there will be no JCUT CNC cutting machines. Collapsed due to equipment.
Why do the plates processed by CNC cutting machine have burrs?
（1）The sharpness of the tool
CNC cutting machines use tools to cut materials, and the sharpness of the tool directly affects the roughness of the cutting surface. If the sharpness of the tool is not strong, then the driven plate will collapse. It is not recommended to cut too fast when the tool is in poor condition.
Generally speaking, due to the different manufacturing processes, the impurities in the multi-layer board are much less than that of the particle board, but in the process of purchasing the board, you should also keep your eyes open, and choose a stable board supplier to prevent the following situations: The damage to the tools is small, the damaged equipment will delay the construction period, and even industrial matters will be big, the choice of sheet metal is very important!
（2）Plate material
Boards used to produce cut material include MDF and Particleboard. The hardness of these two kinds of boards is relatively high, but the two kinds of boards have the same problem, that is, the two kinds of boards are pressed together, that is to say, they are not a whole, if the bonding strength is not strong, it is very difficult to cut it. may crash.
（3） The tool is not clamped firmly
The tool clamping force of the CNC cutting machine is not strong, and the chipping of the plate and the damage of the tool will occur in the process of processing the product.
（4）Spindle speed
It's the same thing with the sharpness of the knife. If the spindle speed is not enough, the board that the cabinet cutting machine drives into is prone to debris. When the spindle speed is adjusted to a high point, pay attention to adjusting it within the scope of use of the tool.
（5） The vacuum adsorption effect is poor.
The adsorption capacity of the vacuum adsorption table of some cutting machines is not very strong. When the product is processed, the adsorption force of the workpiece is not strong, resulting in the displacement of the plate and the collapse of the plate.
